Electronic component dryer, drying for industrial part and materials

In many fields of industrial production today, it is indispensable for specialized drying equipment, the electronic component dryer is one of them. Many components need to be dried during manufacturing, processing, or regeneration such as electronic components, circuit boards, transformers, paint parts, mica material, rubber, and plastic… so use a suitable dryer to ensure High efficiency is necessary

The image above is a kind of electrical power component used in 3-phase electrical equipment such as for heat supply, for fans with large capacity. This is like a kind of electrical switch (on/off) but has a high voltage and high current, so it is necessary to use a heat sink. The black hard plastic material used to cover the entire internal circuitry needs to be dried for 6-8 hours at low temperatures to ensure the best and fastest hardening. That is a very specific component, other components such as electronic circuits, transformers to dry insulation oil, paint materials that need to be heat-resistant, or mica materials that need to be softened…

The picture above is the MSD500-160 model of Mactech industrial dryer line with a drying temperature range of 35~160^oC or higher to 200-300^oC when customers order the suitable drying machine. This is a middle range dryer model with a drying chamber volume of 500 liters that is suitable for many current needs in small and medium industrial companies because the components have often size and the quantity may not too large. In addition, Mactech has many other large-sized dryer models such as 1 m3 drying chamber, 2-3-4-5m3 which are suitable for many production scales of customers. In particular, the high-temperature dryers all have the function of setting the complex drying modes such as drying in many stages, different temperatures and times, or using a multi-sensor temperature controller to help users can precisely control of the drying parameters.

On the video is a model of a small electronic component dryer with a temperature limit of 300^oC, suitable for drying a variety of mechanical and electronic products and in many other applications that need to use temperatures as high as hundreds of degrees Celsius. Normally, the inside material of the machine is 304 stainless steel plate with 1mm thickness and the outside of the machine is heat-resistant powder-coated steel, the wall of the machine is 120-150mm thick, containing suitable insulation, both ensuring high aesthetics and reduce product cost, however, Customers can order with specific requirements to best suit their usage requirements.

Below is a summary of the types of electronic component dryers with different drying chamber volumes and different drying temperatures, please click on each model to learn more information.

MODEL	Input Capacity	Temperature
MSD100-160 industrial dryer	≤ 10kg	35~160oc
MSD200-160 industrial dryer	≤ 20kg	35~160oc
MSD500-160 industrial dryer	≤ 50kg	35~160oc
MSD1000-160 industrial dryer	≤ 100kg	35~160oc
MSD2000-160 industrial dryer	≤ 200kg	35~160oc
MSD3000-160 industrial dryer	≤ 300kg	35~160oc
MSD100-200 industrial dryer	≤ 10kg	35~200oc
MSD100-300 industrial dryer	≤ 10kg	35~300oc
MSD200-200 industrial dryer	≤ 20kg	35~200oc
MSD200-300 industrial dryer	≤ 20kg	35~300oc
MSD500-200 industrial dryer	≤ 50kg	35~200oc
MSD500-300 industrial dryer	≤ 50kg	35~300oc
MSD1000-200 industrial dryer	≤ 100kg	35~200oc
MSD1000-300 industrial dryer	≤ 100kg	35~300oc
MSD2000-200 industrial dryer	≤ 200kg	35~200oc
MSD3000-200 industrial dryer	≤ 300kg	35~200oc

So, with the above basic information about electronic component dryers, customers have a clear understanding and can contact Mactech directly for more advice on each machine. Thank you for your visit to our website.