MSD1000-160 industrial dryer is a midle scale dryer, allowing drying of less than 100kg of common products in civil and industrial. This drying machine has a drying temperature of 35~160oC, suitable for drying variety of products from cereal seeds to industrial material and many components of machine. The drying method can sets up multiple automatic drying stages at different temperatures and times. To meet a variety of drying products and be flexible in use, for example drying a product that needs to be dried in 3 different steps, 1 hour of drying at 50 degrees, 2 hours after drying at 100 degrees and the last 3 hours of drying at 150 degrees, Users only need to set all the parameters once, then the machine switches the stage automatically and ends when the drying time is over.
You can see more another industrial dryer in the table below
|MSD100-160 industrial dryer||≤ 10kg|
|MSD200-160 industrial dryer||≤ 20kg|
|MSD500-160 industrial dryer||≤ 50kg|
|MSD1000-160 industrial dryer||≤ 100kg|
|MSD2000-160 industrial dryer||≤ 200kg|
|MSD3000-160 industrial dryer||≤ 300kg|
CÁC NỘI DUNG CHÍNH
Components of the MSD1000-160 industrial dryer
The High temperature dryers require better insulation, a thicker cover, and heat resistance as high as 250oc. The machine’s components include a sturdy frame with 304 stainless steel inner layer and heat-resistant powder-coated steel, 250oc insulation material, convection fan, heater, high temperature sensor, electronic control box, electrical box, wheels, door lock, moisture release mechanism, and some other components. Users can easy replace the parts of dryer when necessary, warranty time is 2 years.
Application of the MSD1000-160 industrial dryer
This is a kind of high-temperature dryers, industrial dryers, so they are often used for two main purposes, including:
– Civil use: to make dried and crispy for cereal seeds such as legumes, chia seeds, macadamia nuts, walnuts, cashews, almonds… used for instant food, granola and cereal powder.
– Industrial use: drying and heat treatment for materials such as paint, wood, plastic, mica, silicon, steel, molds, circuit boards…
Technical parameters of MSD1000-160 industrial Dryer
|Drying mode||circulating hot air|
|Control system||Manual+Auto / LCD screen|
|Drying process||fully automatic, multi-stage drying with different parameters|
|Input capacity||≤ 100 kg/batch|
|Drying temperature||35°C ~ 160°C|
|Tray area||7.1 m2|
|Heating medium||Finned Tubular Heaters|
|Number of trays||15 pieces|
|Tray dimension||56*84*2 cm|
|Heating rate||≤ 30 minutes (without fresh material)|
|Power requirement||5 Kwh, 380V / 50Hz|
|Installation area (m2)||5 m2|
|Machine outside dimension (W*L*H)||90*110*200 cm|
|Machine inside dimension (W*L*H)||57*90*135 cm|
|Trays material||SUS 304, plate, hole ∅4mm|
|Shell / Frame material||Outside: Powder coated steel / Inside: 304 stainless steel|
|Shell thickness||70~100 cm|
|heat insulation material||heat resistant 250oc|
|Weight of machine (kg)||300 kg|
|Warranty time||2 years|
The image above is drying cereal grains to create today’s popular products including granola, instant seeds, nutritious seeds, nutritious cereal powders. When Drying the seeds for preservation, only needs to be dried at low temperature of 50~80oc, while drying to eat, they need to be dried at high temperature of 100~140oc.
The image below is drying and shaping for some parts of machine, suitable for drying fake eyelashes, heat treatment for plastic, mica, paint, synthetic materials… With a maximum temperature of 160oc, it is usually applied to common products both in civil and industrial.
The advantage of Mactech industrial dryer?
- The machine is durable and stable, small noise
- The machine is very well insulated, inside 160 , the outside is lower than 40
- Multi-stage drying mode at different drying temperatures and time
- Easy-to-use, intuitive electronic controls
- Users can easily replace components when needed.
- Nationwide warranty service.