MSD200-160 industrial dryer, temp 35~160, used for civil and industrial

The MSD200-160 industrial dryer from Mactech Vietnam Technological Joint Stock Corporation is the company’s small drying equipment, that is commonly used for drying about 10 ~ 20kg material with a temperature range of 35 to 160^oC. This drying machine is made to satisfy the demands of drying for many products in civil and industrial, that must be dried at temperatures between 100 and 160^oC, making sure the product is crispy and dried. Cereal seeds like soybeans, legumes, rice, cashews, almonds, walnuts, sunflower seeds, pumpkin seeds, and other nuts as well as some industrial materials including mica, rubber, paint, iron, steel, fake eyelashes, hair, and silicon are typical drying materials for this dryer.

You can see more another industrial dryer in the table below

MODEL	Input Capacity
MSD100-160 industrial dryer	≤ 10kg
MSD200-160 industrial dryer	≤ 20kg
MSD500-160 industrial dryer	≤ 50kg
MSD1000-160 industrial dryer	≤ 100kg
MSD2000-160 industrial dryer	≤ 200kg
MSD3000-160 industrial dryer	≤ 300kg

Components of the MSD200-160 industrial dryer

The High temperature dryers require better insulation, a thicker cover, and heat resistance as high as 250^oc. The machine’s components include 304 stainless steel frame, 250^oc insulation, convection fan, heater, temperature sensor, electronic control box, electrical box, wheels, door lock, moisture release mechanism, and some other components. Users can easy replace the parts of dryer when necessary, warranty time is 2 years.

Application of the MSD200-160 industrial dryer

This is a line of high-temperature dryers, industrial dryers, so they are often used for two main purposes.
– Civil use: to make dried and crispy for cereal seeds such as legumes, chia seeds, macadamia nuts, walnuts, cashews, almonds… used for instant food, granola and cereal powder.
– Industrial use: drying and heat treatment for materials such as paint, wood, plastic, mica, silicon, steel, molds, circuit boards…

Technical parameters of MSD200-160 industrial Dryer

Model	MSD200-160
Advantage	All-in-one
Drying mode	circulating hot air
Control system	Manual+Auto / LCD screen
Drying process	fully automatic, multi-stage drying with different parameters
Input capacity	≤ 20 kg/batch
Drying temperature	35°C ~ 160°C
Tray area	1.4 m2
Shelf spacing	60mm
Heating medium	Finned Tubular Heaters
Number of trays	6 pieces
Tray dimension	60*38*2 cm
Heating rate	≤ 30 minutes (without fresh material)
Power requirement	2 Kwh, 220V / 50Hz
Installation area (m2)	2 m2
Machine outside dimension (W*L*H)	65*80*120 cm
Machine inside dimension (W*L*H)	40*60*55 cm
Trays material	SUS 304, plate, hole ∅4mm
Shell / Frame material	Outside: Powder coated steel / Inside: 304 stainless steel
Shell thickness	70~100 cm
heat insulation material	heat resistant 250oc
Weight of machine (kg)	100 kg
Manufacturer	Mactech VN
Warranty time	2 years

The image above is drying cereal grains to create today’s popular products including granola, instant seeds, nutritious seeds, nutritious cereal powders. When Drying the seeds for preservation, only needs to be dried at low temperature of 50~80^oc, while drying to eat, they need to be dried at high temperature of 100~140^oc.

The image below is drying and shaping for some parts of machine, suitable for drying fake eyelashes, heat treatment for plastic, mica, paint, synthetic materials… With a maximum temperature of 160^oc, it is usually applied to common products both in civil and industrial.

The advantage of Mactech industrial dryer?

• The machine is durable and stable, small noise
• The machine is very well insulated, inside 160 , the outside is lower than 40
• Multi-stage drying mode at different drying temperatures and time
• Easy-to-use, intuitive electronic controls
• Users can easily replace components when needed.
• Nationwide warranty service.